Models
· GPR2100 - OEM board with BNC connectors
· GPR2110 - OEM board with SMA connectors
· GPR2120 - enclosed OEM board
· GPR1100 - 1RU unit with display and keypad, Ethernet and SNMP
Features
· Up to eight 10 MHz Outputs
· Up to eight 1pps Outputs
· Optional RS232 TOD output for CMMB applications
· High performance design, utilizing ovenized quartz oscillator
· Antenna cable length compensation
· Serial port for local console interface
· PC GUI control software available for GPR2100, GPR2110 and GPR2120
· WEB GUI and SNMP control over Ethernet for GPR1100
· Alarm Relay Dry Contacts Available on the RS-485 Port (GPR1100 Only)
Description and Application
Based on M12MT receiver module, UBport GPS receiver is a compact, cost effective source of GPS locked timing reference. Designed for applications where 10MHz/1pps clock sources are required to synchronize multiple transmission devices, this module provides an accurate high quality signal set. Multiple outputs enable all equipment in a site or base station to share a single accurate and stable reference source.
UBS GPS Receivers optionally provides the TOD information on serial RS232 port, compliant with the CMMB standard requirements.
UBport GPS module is available in three basic models: OEM board (GPR2100 and 2110), enclosed OEM board (GPR2120) and 1U unit (GPR1100), equipped with LCD display, keypad and Ethernet connection.
GPS Receiver Unit includes a GPS receiver, as well as a 10MHz and 1pps distribution system. GPR1100 also includes a controller module, supporting the WEB GUI and SNMP interfaces over the Ethernet connection.
· GPR2100 - OEM board with BNC connectors
· GPR2110 - OEM board with SMA connectors
· GPR2120 - enclosed OEM board
· GPR1100 - 1RU unit with display and keypad, Ethernet and SNMP
Features
· Up to eight 10 MHz Outputs
· Up to eight 1pps Outputs
· Optional RS232 TOD output for CMMB applications
· High performance design, utilizing ovenized quartz oscillator
· Antenna cable length compensation
· Serial port for local console interface
· PC GUI control software available for GPR2100, GPR2110 and GPR2120
· WEB GUI and SNMP control over Ethernet for GPR1100
· Alarm Relay Dry Contacts Available on the RS-485 Port (GPR1100 Only)
Description and Application
Based on M12MT receiver module, UBport GPS receiver is a compact, cost effective source of GPS locked timing reference. Designed for applications where 10MHz/1pps clock sources are required to synchronize multiple transmission devices, this module provides an accurate high quality signal set. Multiple outputs enable all equipment in a site or base station to share a single accurate and stable reference source.
UBS GPS Receivers optionally provides the TOD information on serial RS232 port, compliant with the CMMB standard requirements.
UBport GPS module is available in three basic models: OEM board (GPR2100 and 2110), enclosed OEM board (GPR2120) and 1U unit (GPR1100), equipped with LCD display, keypad and Ethernet connection.
GPS Receiver Unit includes a GPS receiver, as well as a 10MHz and 1pps distribution system. GPR1100 also includes a controller module, supporting the WEB GUI and SNMP interfaces over the Ethernet connection.
GPS Receivers - System and Module
© 2004-2010 Unique Broadband Systems Ltd. All Rights Reserved.
Standard Terms and Conditions
Standard Terms and Conditions
ISO 9001:2008
Registered Company
Registered Company
Webmaster: felixs@uniquesys.com
 |
 |
 |
 |
 |
 |
Time
 |
 |
 |
 |
 |
 |
 |
 |
 |
Best Viewed With Firefox or IE8